Armstrong State University Admissions - Costs and More

Armstrong State University Admissions - Costs and More Armstrong Atlantic State University Admissions Overview: To apply to Armstrong State, students need to submit an application online, by following the directions on the schools website. Students must also submit test scores from either the SAT or ACT. While scores from both tests are accepted, slightly more students submit scores from the SAT. With an acceptance rate of 80%, the school is not considered selective, and students with high grades and test scores have a good shot of being admitted.   Will You Get In? Calculate Your Chances of Getting In  with this free tool from Cappex Admissions Data (2016): Armstrong State University Acceptance Rate: 80%Test Scores 25th / 75th PercentileSAT Critical Reading: 450 / 550SAT Math: 440 / 530SAT Writing: - / -What these SAT numbers meanACT Composite: 19 / 23ACT English: 18  / 23ACT Math: 18  / 23What these ACT numbers mean Armstrong Atlantic State University Description: Armstrong Atlantic State University is a public, four-year institution in Savannah, Georgia. Located 25 miles from Tybee Island Beach, the 268-acre campus supports over 7,000 students with a student/faculty ratio of 18 to 1. Armstrong offers over 100 academic programs across its colleges of Education, Liberal Arts, Health Professions, Science and Technology, and Graduate Studies. Students are highly engaged outside of the classroom, and Armstrong is home to more than 80 student clubs and organizations including a Karate Club, Science Fiction/Fantasy Club, and the Philosophical Debate Group. The university also has a wide variety of intramural sports such as Inner Tube Water Polo, Sports Trivia, and a Corn Hole Tournament, as well an active Greek life with four fraternities and six sororities. The AASU Pirates compete in the NCAA Division II Peach Belt Conference (PBC); the universitys men’s and women’s tennis teams have recently won three Division II Championships. Enrollment (2016): Total Enrollment: 7,157  (6,397 undergraduates)Gender Breakdown: 34% Male / 66% Female74% Full-time Costs (2016 - 17): Tuition and Fees: $5,360 (in-state); $15,616 (out-of-state)Books: $1,573  (why so much?)Room and Board: $10,176Other Expenses: $3,587Total Cost: $20,696  (in-state); $30,952 (out-of-state) Armstrong Atlantic State University Financial Aid (2015- 16): Percentage of New Students Receiving Aid: 90%Percentage of New Students Receiving Types of AidGrants: 79%Loans: 57%Average Amount of AidGrants: $6,199Loans: $5,878 Academic Programs: Most Popular Majors:  Biology, Criminal Justice, Early Childhood Education, English, Health Sciences, Liberal Studies, Nursing, PsychologyWhat major is right for you?  Sign up to take the free My Careers and Majors Quiz at Cappex. Transfer, Graduation and Retention Rates: First Year Student Retention (full-time students): 74%Transfer Out Rate: 27%4-Year Graduation Rate: 13%6-Year Graduation Rate: 31% Intercollegiate Athletic Programs: Mens Sports:  Golf, Basketball, Baseball, Cross Country, Track and Field, TennisWomens Sports:  Soccer, Softball, Volleyball, Tennis, Golf, Basketball Data Source: National Center for Educational Statistics If You Like Armstrong ASU, You May Also Like These Schools: Applicants interested in a similar-sized school that is also located in Georgia should consider such schools as Valdosta State University, Emory University, Columbus State University, and Clayton State University. These schools vary in term of selectivity- Emory is quite selective, while the others are more accessible. Students interested in a school with a strong athletic program should consider  Flagler College, UNC Pembroke, Lander University, and Francis Marion University, all of which are in the same NCAA conference as Armstrong.

Saudi Arabia - Pestle Analysis Research Paper Example | Topics and Well Written Essays - 1750 words

Saudi Arabia - Pestle Analysis - Research Paper Example Political Factors After the recent uprisings in the Middle East, regime stability in the region is under serious threat. Even though there are no serious threats in the near future, Saudi Arabia’s long-term stability has been questioned. The country is facing a dual problem of responding to the pressures of a reform and also having to counter extremist violence in the region. Saudi Arabia has developed a strong Islamic self-identity. Numerous Islamist groups have known to have made the country their home and also they are being funded by affluent Saudis (BBC, 2012). Since recent extremist attacks, political reform has garnered great support. Even though there were elections held in 2005, democracy was not exercised to the fullest as political parties were banned and women were not allowed to vote. Protesters opposing in public call for the risk of arrests and it is from outside the country that the opposition functions. If there would be an uprising similar to the ones in the region, then that would mean disaster for political stability (BBC, 2012). In the near future, political stability is not threatened and the government has taken various steps to ensure citizens are happy. Government spending and wages have increased greatly in the last couple of years. Also, Saudi Arabia is the largest oil exporter in the world, its internal stability is of prime importance to international powers and hence international is expected to take all measures to ensure stability in the country (Zand, 2011). As mentioned, many reforms have been announced on all fronts by the government with a vision to strike balance between modernization and Islamic wisdom (Shaheen, 2010). Freedom of speech has come of age in the recent years, even though there are constraints. The Kingdom’s policies encourage foreign investment and active participation of foreign companies. There are no restrictions on the movement of capital in and out of the country. Foreign investments enjoy t he same benefits (such as tax exemptions, customs duties, etc) as that of national capital as long as they are in accordance with the Foreign Capital Investment Code. A drawback here is that investment should be economic development projects and should accompany technical knowledge (Saudia-Online, 2010). Overall, the country is politically stable and is attractive in business terms but businesses must closely keep an eye on the movements that can influence long-term political stability. Economic Factors The current business cycle stage of Saudi Arabia is that of a retrenchment and restructuring cycle similar to the one witnessed in between 1996 to 2002. In the earlier phase, major restructuring and reforms took place. The major focus of the government was to ensure that key driver of growth was the private sector.

Bioinspired tough structures Literature review Example | Topics and Well Written Essays - 4500 words

Bioinspired tough structures - Literature review Example Their self-organization is also a contributing factor to the mechanical properties of biological materials together with the manner in which the structures are assembled at the molecular level. Nacre is one of the iridescent layer found in most mollusk shells. It has a high amount of mineral that makes it tough and also stiff. The toughness of nacre is three times harder than its mineral constituents. Nacre has thus become a biomimetic model due to this property since it is the only material with an enormous amplification of its toughness. In this work, different bio-inspired materials shall be analyzed basing on the mechanical and structural properties. The development process of various types of artificial shell will also be analyzed. It is expected that Nacre mineral constituent are in microscopic polygonal tablets and has an ability to slide over one another when loaded under tension. This property has made nacre become a quasi-ductile material with significantly increased toughness and damage tolerance. Natural and biological materials can depict a considerable combination of stiffness, strength, toughness and even low weight which cannot be matched by artificial materials. For this reason, researchers are turning to nature for different design of artificial structures. The high-performance structural materials produced by nature inspires the scientist in the natural design. Also their ability to combine the building blocks and even amplify its properties (Xia, 2015). Nacre currently serves as a sole biomimetic model in the new generation of composite materials. Nacre found in the mollusk shell serves to protect the soft body parts against the harsh environment and the predators. These shells are highly mineralized tissues with at least 95% of it being mineral content. As a result, they have high stiffness and hardness.

Production Management Essay Example | Topics and Well Written Essays - 2000 words

Production Management - Essay Example According to Hill (1991), ‘The production/operations management (POM) task is concerned with the transformation process which takes inputs and converts them into outputs, together with the various support functions closely associated with this basic task’ (cited Brown, 2000; p.7). Such transformation processes can be applied to three main categories, materials, customers and information. Brown (2000) describes that Production Management encompasses the most vital activities of production, beginning from and including, planning and design, production processes of goods and services, and also effective integration of marketing, finance, human resources management and strategy in order to enable a business to enter and compete with both new and existing markets. In other words, a business’s success and sustainability largely depend on the operational capabilities, including efficiency and quality. Production management is a comprehensive phenomenon including distinct and complex activities that need to be performed in order to achieve a firm’s goals. Besides the processes itself, there is a strategic aspect linked to the production management process, without which aligning production processes with the firm’s actual goals, tracking performance of the firm and its processes, and gaining profits become difficult or even impossible. The entire production management can be illustrated in the following manner: Each of these activities requires planning in great detail. The present discussion will be focused on production process in a normal readymade clothes manufacturing unit. Although the focus is on production process, it should be noted that production process is further dependent on the other functions, i.e. strategic planning and tactical planning. For instance, the raw materials required for the production process are procured from

Fire Protection Engineering in the 21st Century Essay Example for Free

Fire Protection Engineering in the 21st Century Essay Abstract Fire protection engineering is the application of scientific and engineering principles to protect people, their property, and their environment from the destructive effects of fire. Fire protection engineers are involved in almost all aspects of fire safety and fire prevention. Among their function is the design, review and recommendation of fire prevention systems, which has two classifications: active and passive. Active fire protection systems react to conditions created by fire, such as increase in temperature or smoke, and act to extinguish the flame. Passive fire protection systems are incorporated in the structural design of the building to prevent spread of fire or smoke, and to prevent structural collapse. Fire protection engineers also adhere to building and fire safety codes. They also participate in the development of these codes, as well as review and enforce them. Fire protection engineers also predict fire behavior by simulating fire conditions through modeling. By this process, certain characteristics of the fire can be predicted. Models may simulate the development of a fire inside an enclosure, look at activation times of output systems such as thermal and smoke detectors, simulate egress situations, or measure the ability of a building to withstand fire. Risk assessments are also done by fire protection engineers and involve hazard analysis, consequence analysis and likelihood analysis. Fire investigation nowadays also involves fire protection engineers that can construct the scene before and during the fire. Fire Engineering 5 I. Introduction Fire protection engineering, the application of scientific and engineering principles to protect people, their property and their environment from fires, is used interchangeably with fire engineering and fire safety engineering. Although this paper uses â€Å"fire protection engineering† to simplify terminologies, it should also be understood that it likewise refers to the two latter terms, except in instances wherein there is a need for differentiation. Several centuries ago, the primary aim of fire protection engineering is to prevent fires, which in those days, has the possibility to devastate entire cities (Hurley 2006). In the 1900’s, the objective of fire protection engineering is to contain a fire in its building of origin. As technology advances, this objective has evolved to containing the fire in the room or object of origin. Towards the end of the twentieth century however, fire protection engineering has evolved to become a professional discipline having its own set of principles (Lucht 1989 cited in Hurley 2006). II. Professional Definition of Fire Protection Engineering Fire protection engineering is the employment of science and technology to protect people and their environment from destructive fires. Some of these principles include design of fire protection systems, analysis of fire hazards, carrying out of risk assessment, fire modeling and post-fire investigation and analysis. Fire protection engineers also review fire protection systems, participate in third-party review of fire protection designs, as well as participate in development of codes that would protect life and property from fire. Furthermore, they may also be called upon to interpret and enforce existing building and fire codes (Koffel 2003). During the design phase of a building, fire protection engineers may work with architects and other engineers to ensure a fire-safe structure. They make Fire Engineering 6 recommendations for cost-effective fire protection solutions to guarantee that the building and its occupants are adequately protected (Society of Fire Protection Engineers 2008). According to a roundtable discussion by fire protection engineers from all over the globe regarding the international practice of fire protection engineering, such a description is true of fire protection engineers in the United States wherein fire protection engineering and fire safety engineering is taken to be the same. According to Koffel (2003), who facilitated the discussion, such a broad definition is differentiated in Australia where fire protection engineers and fire safety engineers offer distinct services. Fire protection engineers are those that design active fire protection systems such as sprinklers, and fire detection and alarm systems according to the appropriate standards. This task is usually done by mechanical engineers who have specialized in active fire protection systems. The design of passive fire protection systems, which are usually incorporated as part of the structural design of a building, is specified by structural engineers and architects. Fire safety engineers, on the other hand, are those that develop fire safety strategies for a building or facility. The same is true in the United Kingdom where â€Å"fire protection engineering† is not a common term. That term is also generally used for those who design and install active fire protection systems. Fire safety engineers are those that assist in the design of buildings and structures in order to meet the life safety requirements of the law. Such requirements in the design include means of escape, structural fire resistance, internal and external fire spread, fire spread through cavities and internal openings, and access and facilities for fire service. Let it be reiterated, however, that for the rest of the paper, fire protection engineering refers to the broad description used in the United States. By training, education and experience, a fire protection engineer is expected to be familiar with the nature and characteristics of fire, analyze how fire starts, how it grows and Fire Engineering 7 affect people, buildings and property, and how it can be detected, controlled and extinguished (Hurley 2006; Society of Fire Protection Engineers 2008). Furthermore, they should be able to anticipate the behavior of buildings, structure and apparatus so as to better prevent life and property from fire. III. Fire Protection Systems In the event of a fire in a building, the protection of the occupants as well as of property is accomplished by a combination of active and passive means. Active fire protection systems are only used when fire is already present. Such systems are usually activated by a combination of sensors or mechanical means (Evans et al. 2005). A sprinkler system, a smoke alarm and a fire defence are just a few examples of active fire protection systems. Passive fire protection systems, on the other hand, insulate a structure by increasing its fire resistance. These systems become an integral part of the building layout and construction materials, and include (but not limited to) compartmentation and fire barriers, stairways for rapid evacuation, and spray-on fire proofing. Both systems are complimentary, not competitive (Cafco International 2007). The law recognises them as being able to (and should) work together to ensure safety in the event of fire. A. Active Fire Protection Systems The most common active fire protection systems used inside buildings are fire alarm systems, smoke control systems, water sprinklers, and portable fire extinguishers and hose reels. Each of these will be discussed in detail in the succeeding discussion. A. 1 Fire Detection and Alarm Systems The purpose fire alarm systems is to detect fires, alert the occupants, send for emergency rescue, and provide information that will facilitate emergency response (Evans et al. 2005). These systems have several main functions depending on the fire scenario, the type Fire Engineering 8 of building, the number of occupants and criticality of content and mission (Artim 2007). First, they provide a means to recognize a developing fire, either by manual or automatic means. Second, they notify building occupants to the fire condition and the necessity of evacuation. Third, they may also transmit signal to emergency responders such as the fire station to alert them of the building’s condition. They may also be used to shut down electrical and air handling equipment, and may be used to set off automatic suppression systems. The control panel is considered the fundamental component of any fire detection and alarm system. Its function is to monitor the â€Å"input† devices, such as the components that detect smoke and fire and then activates the alarm â€Å"outputs† such as horns, bells, warning lights, emergency telephone dialers, and building controls (Artim 2007). Although human beings are excellent fire detectors as they are normally equipped with senses that can detect smoke, heat, flame and odor, they can, in some cases, become an unreliable detection method. A person may not be present during the fire, may not raise an alarm effectively or may not be in perfect health to perceive fire signals. It is for these reasons that automatic fire detectors have been developed. There are many kinds of automatic fire detectors; the most commonly used are thermal detectors, smoke detectors and flame detectors.

The Relevance of Edith Wharton’s Roman Fever to the Modern World Essay

The Relevance of Edith Wharton’s Roman Fever to the Modern World According to the World Health Organization, â€Å"of the 75 million children under five in Africa a million and a half die each year of pneumonia.† As distressing and sad as this statistic is, it points out the great danger pneumococcus still is to young people in the developing world. It’s in the developed world, but at a time before antibiotics, at a time when acute respiratory ailments posed an even greater but still preventable threat to the younger set that concerns us here and that inspires a deeper look at the full implications of respiratory disease. The WHO goes on to say that acute respiratory infection (ARI) â€Å"is one of five conditions which account for more than 70% of child mortality in Africa.† So not only is pneumonia prevalent, it is still deadly. The danger it poses to young people has life-influencing ramifications, ones with an incredible emotional content. Though more treatable now, as we’ll see later, the persistence of pneumonia f its in with the puzzle as it presents itself, since it is linkable to a much more fundamental human ailment. In Edith Wharton’s â€Å"Roman Fever† we also see ailments of a pulmonary and life-changing import. Indeed, the entire story seems shot-through with infection. Wharton writes of Mrs. Slade and Mrs. Ansley, both widowed, both taking their daughters to Rome on holiday as they had been. Their own intertwined histories Wharton describes at the story’s onset as â€Å"all of the movings, buyings, travels, anniversaries, illnesses† (emphasis mine) (751). Wharton then begins the tale with illness. It is only as the narrative progresses that we get a sense of how important illness is to become: Yes; being the Slade’s widow wa... ...an be treated with antibiotics, it can be treated with aversion therapy or the simple addition of marriage. Other love preventatives such as war and country music are both quite feasible and can actually be very profitable for Western nations, though they seem a little cruel, especially the latter. Wharton’s â€Å"Roman Fever† at the very least points the way; it is a warning that love and pneumonia are inextricably linked, an idea that we’d do well to pay more attention to today when the ease of a high technology lifestyle fosters an arrogance that all the world’s problems have been solved. Works Cited Wharton, Edith. â€Å"Roman Fever.† Edith Wharton: Collected Stories 1911-1937. New York: Literary Classics 2001. 749-62. World Health Organization. â€Å"Childhood Diseases in Africa† Fact Sheet N 109. March 1996. 14.3.2003 http://www.who.int/inf-fs/en/fact109.html

A Comparison between the Moral Philosophy of John Stuart Mill and Immanuel Kant

The discussion on Moral Philosophy and ethics has always been a controversial and very debatable topic, especially if we are to discuss each and every philosophy or ideology of every philosopher starting off from Greece up to the Post Modernists.   In relation to this particular philosophy, the author would like to compare two of the philosopher’s moral philosophies and how each come to have similarities and contrast with each.To be more specific, the author would like to dwell on the similarities and differences between the moral philosophies of Utilitarianism proponent John Stuart Mill and Idealist Immanuel Kant and to answer the question What are the key concepts in the moral theory of John Stuart Mill and Immanuel Kant?   Furthermore, to be able to answer the specific question: What are the similarities and differences in the moral ideologies of Mill and Kant?The school of Utilitarianism had John Stuart Mill as one of its leading proponents.   Mill speaks of morality in the sense of desire versus desirable but he contradicts that of Jeremy Bentham.   He further states that the true utilitarian interprets the greatest happiness principle to mean not my greatest happiness but the greatest happiness of the greatest number.[1] Contrary to the first utilitarian philosophy of Jeremy Bentham, Mill posits through this principle the concept of greater good for the greater whole.Mill further states that utility would enjoin first, that laws and social arrangements should place the happiness or the interest of every individual, as nearly as possible in harmony with the interest of the whole; and secondly, that education and opinion which have so vast a power of human character, should so use that power as to establish in the mind of every individual an indissolvable association between his own happiness and the good of the whole†¦so that a direct impulse to promote the general good maybe in every individual one of the habitual motives of action.[2] We can see arising from this argument that Mill was giving more emphasis on the quality of pleasures and not just our personal pleasure and turns towards the good of the whole which we must seek.   This therefore gives Mill ground morality not just on personal pleasure but more on our obligation towards the people or on others.This, according to Mill does not at all contradict with the Utilitarian doctrine / teaching where one aims to seek for happiness or pleasure.   According to Mill, happiness is the center of moral life and the most desirable goal of human conduct.   The said argument of Mill gives us a gray area in asking what would be the basis or sole basis of desirable?Mill answers that that which is desirable is that we ought to choose.   Happiness is something that we desire and it is our moral duty to pursue happiness.   Mill’s moral principle evolves in the concept that an act is good in so far as it produces happiness.   Mill was trying to build a mor al system that was based on duty, by stating that which ought to do upon what in fact we already do.   Happiness for him is still the ultimate of human conduct.When Mill posited happiness as something that man should sought for out of duty, it cannot but prevent people from raising their counter-arguments with the query how can we prove that happiness is the true and desirable end of human life and conduct?To answer the query, Mill posits and states that the sole evidence it is possible to produce that anything is desirable is that people does desire it.[3] The answer that Mill provided though has not completely settled his detractors because Mill has made an analogy wherein he compared visible to that which is desirable.According to him, that which is visible means that something is capable of being seen, thus, that which is desirable automatically makes us desire it.   Such a conclusion falls under one of the logical fallacies because that which is seen, by means of the facult y of the mind means it is visible to our senses but that which is desirable, cannot and does not automatically become an end that we would ought to desire.The fact lies that the human mind, man, as a person may desire a thing which is not desirable in the first place.   Mill proposes that our pursuit is not limited to happiness alone but the pursuit of duty.   According to him, a sense of duty directs our moral thought.   For him, the basis of morality is a powerful natural sentiment, a subjective feeling in our own minds and the conscientious feelings of mankind.[1] Stumpf, Samuel Enoch.   Socrates to Sartre: A History of Philosophy.   Singapore: Mc Graw Hill Inc. 1991. p. 348. [2] Ibid. [3] Ibid. p. 349.